Who likes these wheels?

Realest5.0 · 11-07-2007, 09:16 PM

What would these look like on an SN95? They are Halibrand Cobra III's.
-Andrew

rambozotheclown · 11-07-2007, 09:24 PM

i think theyd look better on the SN95 than the new edge, personally... specially with a drop. should be cool.

4.6stanger · 11-07-2007, 09:25 PM

Well i dont think id run out and buy them, but then again they're nnot terrible lookin wheels, and they'd prolly look good on an sn95....especially with those DD wheels outback.

aguilarf · 11-07-2007, 09:26 PM

I have Chrome 17x9 Halibrand Cobra III's with 275/40/17's on all 4 on my 01 GT. However, mine don't have the deep lip.

Realest5.0 · 11-07-2007, 09:33 PM

My buddy wants to sell me these wheels and tires for $550. They are 17x10.5 and 17x9. Good deal?
-Andrew

H0SS302 · 11-07-2007, 11:11 PM

i wouldnt pay 550 for those, but thats just me.

aguilarf · 11-08-2007, 07:30 AM

If that includes good tires then would say it is a fair price. Comes out to 137.50 per wheel. The magnesium finish is cheaper than the chrome. In the end it's up to you, if you like them go for it.

BigJnSA · 11-08-2007, 08:24 AM

Quote:

Originally Posted by rambozotheclown

i think theyd look better on the SN95 than the new edge, personally... specially with a drop. should be cool.

werd. old school is always cool. i think thats a good price as well.

Realest5.0 · 11-08-2007, 09:19 AM

Well I've never really too big a fan of chrome wheels. That's why I thought they were cool. I'm not against chrome by any means. Chrome wheels look good on the right car.

aguilarf · 11-08-2007, 09:38 AM

True. The only problem I have with mine is they are a pain to clean since the spokes are not flat, and have a raised lip on them. Can't wipe them down as easy as Bullitts or Cobra R's. One thing to look out for is the front wheels will rub at full steering wheel lock when making a sharp turn, so sometimes you got to make a little wider turn to keep from grinding up your wheels. Also if I remember correctly they have an old school looking Tri-Bar spinner/knockoff you can get to replace the flat center cap.

REDHOT86 · 11-08-2007, 11:20 AM

they're nothing I would go and buy but I would mount them up if they were given to me... ya know? I say keep the ones you have on there already... they look good... if it's the car in your sig. -J

**bandit** · 11-08-2007, 11:30 AM

no sir, i don't like 'em.

Agent Jones · 11-08-2007, 11:54 AM

I think they kinda look like the 05+ v6 stock wheels. They look ok.

seco · 11-08-2007, 02:34 PM

Quote:

Originally Posted by REDHOT86

they're nothing I would go and buy but I would mount them up if they were given to me... ya know? I say keep the ones you have on there already... they look good... if it's the car in your sig. -J

yeah - I'd rather put the 550 on an alternate set

Wiked · 11-08-2007, 02:50 PM

The rims are nice, but like others have said, only if it was an upgrade from basic stock and for a hell of a deal, yours look like Mach rims, and they do look nice already... save the money for something else IMO.

Realest5.0 · 11-09-2007, 10:28 AM

Never mind those Cobra III's. Yeah, those were my Machs. I sold them yesterday to buy these instead.

Please disregard the body of my car. Lol! She's under construction.

Realest5.0 · 11-14-2007, 10:49 AM

So how do you guys like my choice of wheels?

FordGT08 · 11-14-2007, 10:56 AM

Quote:

Originally Posted by Realest5.0

So how do you guys like my choice of wheels?

much better bro..looks gooooood!!!!!

Wiked · 11-14-2007, 11:58 AM

Quote:

Originally Posted by Realest5.0

So how do you guys like my choice of wheels?

NICE

Realest5.0 · 11-14-2007, 10:18 PM

Thanks guys. 17x9's up front, 17x10.5's out back. Man, I want to finish the body work!

11-07-2007, 09:16 PM	#1
Realest5.0 Come here and i'll freshen your breath. Join Date: Aug 2007 Location: Denton, TX Posts: 263 Trader Rating: (1)	Who likes these wheels? What would these look like on an SN95? They are Halibrand Cobra III's. -Andrew Attached Thumbnails __________________ ---> I have Mexican blocks. - Andrizzle - 972 742 5155 '94 Mustang GT '87 Buick Regal Turbo T

11-07-2007, 09:24 PM	#2
rambozotheclown comin' to get ya! Join Date: Aug 2004 Location: San Antonio, TX Posts: 3,897 Trader Rating: (0)	i think theyd look better on the SN95 than the new edge, personally... specially with a drop. should be cool. __________________

11-07-2007, 09:25 PM	#3
4.6stanger Three-hundredths of a second away from it!!!! Join Date: Apr 2007 Location: Lufkin, Texas Posts: 2,296 Trader Rating: (2)	Well i dont think id run out and buy them, but then again they're nnot terrible lookin wheels, and they'd prolly look good on an sn95....especially with those DD wheels outback. __________________ 2002 Mustang GT-K&N FIPK, Accufab Plenum/ 75mm T-body, Diablosport Predator, 4.10s, Pro 5.0 shifter, Bassani O/r x-pipe, Magnaflow Magnapacks, Steeda pulleys, Mickey Thompson ET streets, Moser axles, Eibach Sportlines, Hotchkis U/Lca's, 180* t-stat_ best e.t 13.02@103!!!!

11-07-2007, 09:33 PM	#5
Realest5.0 Come here and i'll freshen your breath. Join Date: Aug 2007 Location: Denton, TX Posts: 263 Trader Rating: (1)	My buddy wants to sell me these wheels and tires for $550. They are 17x10.5 and 17x9. Good deal? -Andrew __________________ ---> I have Mexican blocks. - Andrizzle - 972 742 5155 '94 Mustang GT '87 Buick Regal Turbo T

11-08-2007, 09:19 AM	#9
Realest5.0 Come here and i'll freshen your breath. Join Date: Aug 2007 Location: Denton, TX Posts: 263 Trader Rating: (1)	Well I've never really too big a fan of chrome wheels. That's why I thought they were cool. I'm not against chrome by any means. Chrome wheels look good on the right car. __________________ ---> I have Mexican blocks. - Andrizzle - 972 742 5155 '94 Mustang GT '87 Buick Regal Turbo T

11-07-2007, 09:26 PM	#4
aguilarf 2001 Oxford White Mustang GT Join Date: Oct 2007 Location: San Antonio, TX Posts: 549 Trader Rating: (8)	I have Chrome 17x9 Halibrand Cobra III's with 275/40/17's on all 4 on my 01 GT. However, mine don't have the deep lip.

11-08-2007, 07:30 AM	#7
aguilarf 2001 Oxford White Mustang GT Join Date: Oct 2007 Location: San Antonio, TX Posts: 549 Trader Rating: (8)	If that includes good tires then would say it is a fair price. Comes out to 137.50 per wheel. The magnesium finish is cheaper than the chrome. In the end it's up to you, if you like them go for it.

11-08-2007, 09:38 AM	#10
aguilarf 2001 Oxford White Mustang GT Join Date: Oct 2007 Location: San Antonio, TX Posts: 549 Trader Rating: (8)	True. The only problem I have with mine is they are a pain to clean since the spokes are not flat, and have a raised lip on them. Can't wipe them down as easy as Bullitts or Cobra R's. One thing to look out for is the front wheels will rub at full steering wheel lock when making a sharp turn, so sometimes you got to make a little wider turn to keep from grinding up your wheels. Also if I remember correctly they have an old school looking Tri-Bar spinner/knockoff you can get to replace the flat center cap.

11-08-2007, 11:30 AM	#12
bandit I can has 12second4.0? Join Date: Jun 2003 Location: Bulverde, TX Posts: 15,085 Trader Rating: (0)	no sir, i don't like 'em. __________________

11-08-2007, 11:54 AM	#13
Agent Jones BK owns MCD!! Join Date: Mar 2006 Location: San Antonio Posts: 6,100 Trader Rating: (1)	I think they kinda look like the 05+ v6 stock wheels. They look ok. __________________ Join the Lonestarstangs Social Group for Mustangs http://www.lonestarstangs.com/forum/group.php?groupid=1

11-08-2007, 02:50 PM	#15
Wiked LoneStarStangs Addict Join Date: Sep 2006 Location: Somerset, Tx Posts: 4,374 Trader Rating: (2)	The rims are nice, but like others have said, only if it was an upgrade from basic stock and for a hell of a deal, yours look like Mach rims, and they do look nice already... save the money for something else IMO. __________________ Quote of the Month- "F**k if you understand me, I love being misunderstood, cause I live in suburbs, but I come from the hood" -Lil Wayne Impossible Maze Game<<< Really a maze game, not the song anymore

11-09-2007, 10:28 AM	#16
Realest5.0 Come here and i'll freshen your breath. Join Date: Aug 2007 Location: Denton, TX Posts: 263 Trader Rating: (1)	Never mind those Cobra III's. Yeah, those were my Machs. I sold them yesterday to buy these instead. Please disregard the body of my car. Lol! She's under construction. Attached Thumbnails __________________ ---> I have Mexican blocks. - Andrizzle - 972 742 5155 '94 Mustang GT '87 Buick Regal Turbo T

11-14-2007, 10:49 AM	#17
Realest5.0 Come here and i'll freshen your breath. Join Date: Aug 2007 Location: Denton, TX Posts: 263 Trader Rating: (1)	So how do you guys like my choice of wheels? __________________ ---> I have Mexican blocks. - Andrizzle - 972 742 5155 '94 Mustang GT '87 Buick Regal Turbo T

11-14-2007, 10:18 PM	#20
Realest5.0 Come here and i'll freshen your breath. Join Date: Aug 2007 Location: Denton, TX Posts: 263 Trader Rating: (1)	Thanks guys. 17x9's up front, 17x10.5's out back. Man, I want to finish the body work! __________________ ---> I have Mexican blocks. - Andrizzle - 972 742 5155 '94 Mustang GT '87 Buick Regal Turbo T

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: