Worked on Stang Today

**bighoss88lx** · 12-27-2003, 10:52 PM

I got my car lowered another half inch to an inch and got my DS loop installed. Had a buddy help so it went really quick. I got my tearing apart and putting springs in in about an hour now with air tools. Not bad IMO. Hopefully tommorrow I can go get my MT Sportmans mounted and see if I can hook worth a crap.

tire · 12-28-2003, 12:05 AM

Got a line lock yet? Go for the best 60' on the timeslips page, which shouldn't be hard. I think a ~1.75 is the best. I'll be contending myself here pretty soon.

**bighoss88lx** · 12-28-2003, 12:54 AM

Quote:

Originally posted by V6PowerStang
Got a line lock yet? Go for the best 60' on the timeslips page, which shouldn't be hard. I think a ~1.75 is the best. I'll be contending myself here pretty soon.

No line lock yet. Just wanna pump out the best ET WITH STOCK PARTS. We'll see.

EWP · 12-28-2003, 01:41 AM

Quote:

Originally posted by V6PowerStang
Got a line lock yet? Go for the best 60' on the timeslips page, which shouldn't be hard. I think a ~1.75 is the best. I'll be contending myself here pretty soon.

EwP2003 1990 Coupe 263.0 1.740 8.300@82.04 13.070@103.21

redrum · 12-28-2003, 02:00 AM

elliot-- i believe your timeslip says 2.02 60'.....

well, if you want a line lock, gimme a holla! brand new in box!:jeff:

12-28-2003, 05:22 AM

Quote:

Originally posted by EwP2003
EwP2003 1990 Coupe 263.0 1.740 8.300@82.04 13.070@103.21

weaksauce...I did that in mycar

night hawk went better

blu89hb cuts 1.3s

o3blown cobra ...oh wait

12-28-2003, 05:23 AM

Quote:

Originally posted by redrum
elliot-- i believe your timeslip says 2.02 60'.....

well, if you want a line lock, gimme a holla! brand new in box!:jeff:

I believe that is a warning...
and dont give me a warning for pointin it out, because it says it in the rules of the forum and the warnings list

tire · 12-28-2003, 04:09 PM

Elliot... I can't talk shit yet, but I may be hunting your 60's.

(Since of course anything past 60' you'd eat me alive at. :haha3: )

**bighoss88lx** · 12-28-2003, 06:55 PM

I can forget about those 60's with my gears and my RPM capabilities. But I will shoot for the best stock set-up quarter mile times which I think will be no problem. (Tuning)

12-28-2003, 07:35 PM

you can easily pull low 1.7s on slicks with gears

hell you can even pull 1.8s on 3.27s

and those arent elliots 60s

12-27-2003, 10:52 PM	#1
bighoss88lx Killing is my Business...And Business is Good! Join Date: Aug 2003 Location: Elmendorf, Tejas Posts: 5,960 Trader Rating: (1)	Worked on Stang Today I got my car lowered another half inch to an inch and got my DS loop installed. Had a buddy help so it went really quick. I got my tearing apart and putting springs in in about an hour now with air tools. Not bad IMO. Hopefully tommorrow I can go get my MT Sportmans mounted and see if I can hook worth a crap. __________________ 1988 Mustang LX

12-28-2003, 02:00 AM	#5
redrum ...So I dub thee Unforgiven. Join Date: Jun 2003 Location: Aggieland & SATX Posts: 8,261 Trader Rating: (0)	elliot-- i believe your timeslip says 2.02 60'..... well, if you want a line lock, gimme a holla! brand new in box!:jeff: __________________ Last edited by redrum; 12-28-2003 at 02:10 AM.

12-28-2003, 06:55 PM	#9
bighoss88lx Killing is my Business...And Business is Good! Join Date: Aug 2003 Location: Elmendorf, Tejas Posts: 5,960 Trader Rating: (1)	I can forget about those 60's with my gears and my RPM capabilities. But I will shoot for the best stock set-up quarter mile times which I think will be no problem. (Tuning) __________________ 1988 Mustang LX

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

12-28-2003, 12:05 AM	#2
tire ka-chow! Join Date: Jun 2003 Location: SoCal Posts: 5,745 Trader Rating: (1)	Got a line lock yet? Go for the best 60' on the timeslips page, which shouldn't be hard. I think a ~1.75 is the best. I'll be contending myself here pretty soon.

12-28-2003, 04:09 PM	#8
tire ka-chow! Join Date: Jun 2003 Location: SoCal Posts: 5,745 Trader Rating: (1)	Elliot... I can't talk shit yet, but I may be hunting your 60's. (Since of course anything past 60' you'd eat me alive at. :haha3: )

12-28-2003, 07:35 PM	#10
95snoozer Guest Posts: n/a	you can easily pull low 1.7s on slicks with gears hell you can even pull 1.8s on 3.27s and those arent elliots 60s