World Products Windsor Sr. Heads Iron

slimkid302 · 02-22-2008, 12:06 AM

World Products Windsor Sr. Heads Iron
2.02 intake 1.60 exhaust 58cc
all freshend up
valve job
PSI Springs locks and retainers set for a .740 solid roller cam

Ready to be bolted on. They come with 5/16 guide plates and 7/16 stud.
I have the flow sheets (296 in/ and 215 ex @ .600 lift.) They were ported by Borowski Race Enterprise.
They were 64CC but we milled them to 58cc to raise my compression ratio.

These heads stock w/ crappy springs and no porting go for $995.00 plus shipping at summitracing.com
$850 + shipping

I also have a used TFS-R upp/lower intake. No stripped threads. The TB opening is for a 75MM and its the Satin Finish.
$400.00 + shipping

I also have a used EFI MSD 351W distributor but has no gear.
$175.00 + shipping

Manny

02-22-2008, 12:06 AM	#1
slimkid302 Registered User Join Date: Jan 2007 Location: Harlingen, Tx Posts: 93 Trader Rating: (1)	World Products Windsor Sr. Heads Iron World Products Windsor Sr. Heads Iron 2.02 intake 1.60 exhaust 58cc all freshend up valve job PSI Springs locks and retainers set for a .740 solid roller cam Ready to be bolted on. They come with 5/16 guide plates and 7/16 stud. I have the flow sheets (296 in/ and 215 ex @ .600 lift.) They were ported by Borowski Race Enterprise. They were 64CC but we milled them to 58cc to raise my compression ratio. These heads stock w/ crappy springs and no porting go for $995.00 plus shipping at summitracing.com $850 + shipping I also have a used TFS-R upp/lower intake. No stripped threads. The TB opening is for a 75MM and its the Satin Finish. $400.00 + shipping I also have a used EFI MSD 351W distributor but has no gear. $175.00 + shipping Manny Last edited by slimkid302; 02-22-2008 at 12:08 AM. Reason: spelling

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: