would this work???

cmschlatt · 08-04-2007, 03:40 PM

i got this message: "I have a Dr gas x pipe after the cats that I had on my 06 roush I don't know if it will work on yours, since your a v6."

my question is, will this x pipe work on my stock 2005 v6 mustang? i have gt take off mufflers i want to put on it too. will they fit on the x pipe?
thanks for any help, chris

Agent Jones · 08-04-2007, 03:58 PM

they should fit.

cmschlatt · 08-04-2007, 04:11 PM

i'd have to fit it on to my y pipe right?

Agent Jones · 08-04-2007, 05:24 PM

Quote:

Originally Posted by cmschlatt

i'd have to fit it on to my y pipe right?

no you take off the y pipe and replace it with the x pipe that way you can then have dual exahust and put on the gt take offs

cmschlatt · 08-04-2007, 05:38 PM

it says "after the cats" what does that mean?

Agent Jones · 08-04-2007, 06:43 PM

Quote:

Originally Posted by cmschlatt

it says "after the cats" what does that mean?

you have to cut it behind the cats and have it welded in i believe.

cmschlatt · 08-05-2007, 04:42 PM

alright. i got the x pipe. whats a shop i can take it to that will do it for cheap? i still need a driver's side pipe going from the x pipe to the muffler though. im checking out a shop tomorrow, but if that doesnt go through, id like to know what other good/cheap shops there are.
thanks, chris

cmschlatt · 08-05-2007, 04:43 PM

ps... ive heard a lot about murillo. do they have good prices?

thatdavidkid · 08-05-2007, 04:44 PM

murillo is very expensive.. if you have a x-pipe and a cat back, all you should need is some hangers.. and a way to make the cat back fit with your single cut out bumper..

cmschlatt · 08-06-2007, 01:12 AM

if everything works out tomorrow, i should be rolling with duals

95 GTS · 08-08-2007, 10:18 AM

this should sound good.

cmschlatt · 08-09-2007, 01:57 AM

didnt get them put on. had to work

idk if im going to be able to put them on anytime soon. wont have any money (college) till around christmas. i dont even have the driver's side pipe that will go from the xpipe to the muffler. so unless i can find somebody to do it for a ridiculously cheap price, im probably not getting duals anytime soon

BigJnSA · 08-09-2007, 06:39 AM

try AT automotive off of hildebrandt. its a big tire/muffler shop that does great exhaust work for cheap. id guess they would do the whole job for about $60

XxSlayerized6xX · 08-18-2007, 12:57 PM

I dont see why it shouldnt fit to begin with. My very first setup on my car was off a 5.0 Fox. A Dynomax Hpipe with dual Flows. Fit like a glove. Stuff needed to be cut and fabbed a bit, but there wasnt any problem. I say go for it! =D

cmschlatt · 08-19-2007, 02:29 AM

well i just moved up to college station so i think im going to wait until i have money to do anything. next year will be my car's year though

08-04-2007, 03:40 PM	#1
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	would this work??? i got this message: "I have a Dr gas x pipe after the cats that I had on my 06 roush I don't know if it will work on yours, since your a v6." my question is, will this x pipe work on my stock 2005 v6 mustang? i have gt take off mufflers i want to put on it too. will they fit on the x pipe? thanks for any help, chris

08-04-2007, 03:58 PM	#2
Agent Jones BK owns MCD!! Join Date: Mar 2006 Location: San Antonio Posts: 6,106 Trader Rating: (1)	they should fit. __________________ Join the Lonestarstangs Social Group for Mustangs http://www.lonestarstangs.com/forum/group.php?groupid=1

08-05-2007, 04:44 PM	#9
thatdavidkid looks mean, workin' on the fast Join Date: Oct 2006 Location: Denton Posts: 3,653 Trader Rating: (0)	murillo is very expensive.. if you have a x-pipe and a cat back, all you should need is some hangers.. and a way to make the cat back fit with your single cut out bumper.. __________________ t-5 swap, billit quadrant, upr firewall adjuster, steeda tri-ax, custom jb tool and fab one off subframe connectors. coming soon: 8.8 w/ 3.55:1's, '00 gt brakes, followed by my 306 swap

08-08-2007, 10:18 AM	#11
95 GTS Back in the saddle again Join Date: Feb 2006 Location: Texas Posts: 1,284 Trader Rating: (0)	this should sound good. __________________ 2007 Reflex Silver Wolfsburg Jetta - new hotness 1995 Canary Yellow GTS - Sold 12.81@106.2 w/1.80 60' Boltons/E303 + 3100 lbs + M&H 246 HP/ 290 TQ 12.57 @ 109.21 w/1.76 60' Boltons/GT40Ps/XE270 + 3240 lbs + 555Rs 295 HP / 321 TQ

08-18-2007, 12:57 PM	#14
XxSlayerized6xX The Ruiner Join Date: Jun 2004 Location: Elmendorf AFB, AK Posts: 175 Trader Rating: (0)	I dont see why it shouldnt fit to begin with. My very first setup on my car was off a 5.0 Fox. A Dynomax Hpipe with dual Flows. Fit like a glove. Stuff needed to be cut and fabbed a bit, but there wasnt any problem. I say go for it! =D __________________ Dual Flowmasters Super 40s, MAC Longtube Headers, Dynomax H-Pipe, MAC Underdrive Pullies, Windstar Upper Intake Manifold, 70mm Power Throttle Body, Custom PVCPipe Cold Air Intake, Air-in 25mm Throttle Body Spacer, 4.10 Gears, 7.5 T-Lok, Roush Racing Springs, 9mm Ford Racing Spark Plug Wires, SCT XCal II Tuned

08-04-2007, 04:11 PM	#3
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	i'd have to fit it on to my y pipe right?

08-04-2007, 05:38 PM	#5
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	it says "after the cats" what does that mean?

08-05-2007, 04:42 PM	#7
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	alright. i got the x pipe. whats a shop i can take it to that will do it for cheap? i still need a driver's side pipe going from the x pipe to the muffler though. im checking out a shop tomorrow, but if that doesnt go through, id like to know what other good/cheap shops there are. thanks, chris

08-05-2007, 04:43 PM	#8
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	ps... ive heard a lot about murillo. do they have good prices?

08-06-2007, 01:12 AM	#10
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	if everything works out tomorrow, i should be rolling with duals

08-09-2007, 01:57 AM	#12
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	didnt get them put on. had to work idk if im going to be able to put them on anytime soon. wont have any money (college) till around christmas. i dont even have the driver's side pipe that will go from the xpipe to the muffler. so unless i can find somebody to do it for a ridiculously cheap price, im probably not getting duals anytime soon

08-19-2007, 02:29 AM	#15
cmschlatt Cool Kid Join Date: Jun 2007 Location: College Station/San Antonio Posts: 391 Trader Rating: (0)	well i just moved up to college station so i think im going to wait until i have money to do anything. next year will be my car's year though

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: